Generac RG06045GNAX 60kW 120/208V Standby Generator

Generac RG06045GNAX – 60kW 120/208V 3-Phase Standby Generator

The Generac RG06045GNAX is a 60kW liquid-cooled standby generator designed for backup power applications using 120/208V 3-phase service. This Protector gaseous generator ships configured for natural gas and is field-configurable for liquid propane vapor through the controller. The supplied product data notes that no mechanical modification is required for 4.5L models when changing fuel configuration. It is powered by a 4.5L engine operating at 1800RPM and belongs to the Liquid Cooled RG Series. This specific GNAX configuration is listed with no catalyst option, so catalyst requirements should be reviewed carefully before ordering for California or Massachusetts installations.

60kW Backup Power for 120/208V 3-Phase Applications

The RG06045GNAX is built for standby generator projects where 60kW output, 120/208V 3-phase service, and liquid-cooled performance are required. Final load sizing, voltage requirements, fuel setup, and site conditions should be reviewed by a qualified installer before purchase or installation.

Natural Gas Setup with LP Vapor Field Configuration

This model ships configured for natural gas and can be field-configured for liquid propane vapor using the controller. For 4.5L models, the supplied product data notes that no mechanical modification is required for the NG-to-LP configuration change.

No-Catalyst Configuration for Non-CA/MA Applications

This GNAX model is listed with no catalyst option. The supplied product data notes that 40kW, 48kW, 60kW, and 80kW 4.5L models require an optional catalyst for installation in California and Massachusetts, so this configuration should be selected only when it matches local requirements and project specifications.

Low Inventory and Order Review Requirements

The supplied product details note low inventory and that this product will not be replenished once inventory is depleted. Before ordering, carefully review the generator’s kW rating, fuel type, voltage, RPM, catalyst configuration, and any accessory requirements for the installation.

The Generac RG06045GNAX is designed for permanent standby generator applications where 60kW output, 120/208V 3-phase service, and liquid-cooled performance are part of the project requirements. Its natural gas setup and LP vapor field configuration support fuel flexibility when planned with a qualified installer.

This no-catalyst configuration should be reviewed carefully before purchase, especially for projects with California or Massachusetts emissions requirements. Buyers should also confirm any required accessory harnesses or kits before placing an order.

Generac RG06045GNAX Features & Benefits

• 60kW standby output: Provides a clear power rating for properly sized 120/208V 3-phase backup applications.
• 120/208V 3-phase service: Matches projects that require this specific 3-phase voltage configuration.
• Natural gas configured: Ships configured for NG operation based on the supplied product data.
• LP vapor field configuration: Can be configured for liquid propane vapor through the controller on 4.5L models.
• 4.5L engine: Uses a 4.5L engine operating at 1800RPM for liquid-cooled standby generator performance.
• Liquid Cooled RG Series: Belongs to Generac’s liquid-cooled gaseous standby generator lineup.
• No-catalyst configuration: Identifies this GNAX model as the no-catalyst option in the supplied specifications.
• G3 kit note: If ordering a G3 kit, the supplied product data notes that harness A0005166075 is also required with G0072150.

Generac RG06045GNAX Specifications

Generac RG06045GNAX Info

Generac RG06045 User Manual

Generac RG06045 Installation Manual

Generac RG06045 Specification Sheet