The Crystal Quest Lead Removal Whole House Water Filtration is a point-of-entry water treatment system designed to reduce lead before water reaches household fixtures, with system selection and maintenance guided by water testing. It is available in 6-8 GPM, 8-10 GPM, 12-14 GPM, and 16-18 GPM flow-rate configurations, with fiberglass or stainless steel tank structures. The system uses lead-removal resin media with frequent regeneration using sodium chloride or potassium chloride, and the automatic control valve regenerates according to the programmed date and time. Source materials describe 20" sediment pre-filtration and 20" solid carbon post-filtration as part of the system layout. Because dissolved lead is not reliably detected by taste, smell, or appearance, this whole house lead water filter should be selected based on water testing, service-flow demand, regeneration planning, tank material preference, and site conditions.
This Crystal Quest system is designed for point-of-entry lead reduction rather than single-faucet treatment. It supports household water use across multiple fixtures, with flow-rate options sized for different home demands and contaminant conditions.
Lead reduction is handled by regenerating resin media designed for lead removal. Crystal Quest states that frequent regeneration with sodium chloride or potassium chloride is required, with the automatic control valve regenerating according to programmed date and time.
Source materials describe water flowing through a 20" sediment cartridge, the lead-removal media tank, and a 20" solid carbon cartridge. The sediment stage helps reduce sand, silt, dirt, and larger particles, while the solid carbon cartridge is listed for VOCs and remaining insecticides, pesticides, and industrial solvents when present.
The system is available with fiberglass or stainless steel tank structures. Confirm the best tank material for the installation environment, water conditions, and maintenance preferences before ordering.
This whole-house lead filter is built for homes where lead reduction is needed at the main water line. It should be sized around tested lead levels, service-flow demand, regeneration needs, tank material preference, and available installation space.
Choose the flow-rate configuration that fits your home’s water demand and tested water conditions. Higher household flow demand may require a larger GPM system, while tested lead levels and water conditions should guide maintenance and regeneration planning.
Need help choosing a lead removal whole house filter?
TrueStead Supply can help you compare water-test results, flow-rate needs, tank material, and regeneration requirements.
✓ 6-18 GPM flow-rate options
✓ Regenerating resin media design
✓ Fiberglass or stainless steel tank choices
| Brand | Crystal Quest |
| Product Type | Lead removal whole house water filtration |
| Primary Treatment | Lead reduction |
| Flow Rate Options | 6-8 GPM, 8-10 GPM, 12-14 GPM, or 16-18 GPM |
| Tank Structure Options | Fiberglass or stainless steel |
| Capacity Note | Media service life depends on tested lead level, water usage, regeneration schedule, and source-water conditions. |
| Service Flow Mapping | 6-8, 8-10, 12-14, or 16-18 GPM depending on selected configuration |
| Tank Dimensions | Confirm tank dimensions for the selected flow-rate configuration before ordering |
| Backwash / Regeneration | Regenerating system with automatic control valve; regeneration runs according to programmed date and time |
| Regeneration Frequency | Crystal Quest notes regeneration is generally weekly; actual schedule should be programmed based on system setup and water conditions. |
| Water Testing Note | Lead is invisible, odorless, and tasteless when dissolved in water; water testing should guide system selection, regeneration planning, and maintenance. |
| Installation Guidance | Installation should be performed by a qualified plumber and follow local plumbing codes. |
| Regeneration Media | Sodium chloride or potassium chloride; confirm regeneration schedule and setup requirements for the selected configuration |
| Brine Tank Dimensions | Confirm brine tank dimensions for the selected configuration before ordering |
| Pre-Filtration | Sediment pre-filtration is described in source materials; confirm included filters for the selected configuration |
| Post-Filtration | 20" solid carbon cartridge for VOCs and remaining insecticides, pesticides, and industrial solvents when present |
| Tank Material Note | Confirm the best tank material for the installation environment, water conditions, and maintenance preferences before ordering |
| Optional Add-Ons | Leak detector valve and 12 GPM ultraviolet sterilizer options where available |
| Selection Note | Review lead test results, service-flow demand, regeneration requirements, tank material, and installation conditions before final selection |
| Regeneration Note | Confirm regeneration media, schedule, and setup requirements in the installation guide for the selected configuration |
