The AIMS Power Flush Mount 30 Amp Charge Controller PWM 12/24V is a compact solar charge controller designed for flush-mounted installation in small or space-limited areas. Built for 12V and 24V solar battery systems, this PWM controller supports compatible gel, sealed, AGM, flooded, lithium, and user-defined battery settings. The LCD display provides key system visibility, including battery voltage, PV input voltage, charging current, battery status, and controller information. With a USB outlet, PV input and battery output ports, IP32 enclosure, heatsink cooling, and built-in protections, this controller is a practical choice for RVs, boats, vehicles, cabins, and compact off-grid solar setups.
The flush mount profile helps the controller sit cleanly into panels, cabinets, dashboards, and compact equipment spaces where surface-mounted hardware may be less convenient.
This AIMS Power controller uses PWM charging technology with a maximum battery current of 30 amps and supports both 12V and 24V battery systems when properly configured and matched to the solar array.
The controller supports multiple battery settings, including gel, sealed, AGM, flooded, lithium, and user-defined profiles. Lithium battery mode requires manual voltage setup, so system voltage and charge parameters should be configured carefully before use.
The LCD display shows important solar charging information, while built-in protections support safer operation against overload, short circuit, high voltage, high temperature, low voltage, and auto-correction conditions.
This flush mount solar charge controller is designed for compact power setups where a clean installed appearance, accessible LCD monitoring, and 30 amp solar charging control are important.
Use it in properly sized RV, boat, vehicle, cabin, and compact off-grid solar systems that require 12V or 24V PWM charge control with selectable battery profiles and basic system monitoring.
Need help matching a flush mount controller to your solar setup?
Contact TrueStead Supply for solar equipment guidance, battery compatibility support, and quote assistance.
✔ Solar charging support ✔ Battery setup guidance ✔ Off-grid and mobile power options
Contact Us for a Quote| Brand | AIMS Power |
| Model / SKU | SCC30AFM |
| Product Type | Flush Mount PWM Solar Charge Controller |
| System Voltage | 12V / 24V |
| Maximum Battery Current | 30A |
| PV Operating Voltage | 55Voc Max |
| Maximum PV Open Circuit Voltage | 55V |
| Rated PV Input | 12V: 360W; 24V: 720W |
| Self Power Consumption | <2W |
| Efficiency | 97% |
| Battery Types | Gel, Sealed, AGM, Flooded, Lithium, User Defined |
| Charging Stages | 3 Stage Charging: Boost, Float, Equalize |
| Boost Charge Voltage | Sealed: 14.4V; AGM/Gel: 14.2V; Flooded: 14.6V; Lithium/User Defined: 10V–15V |
| Float Charge Voltage | Sealed/AGM/Gel: 13.8V; Flooded: 13.8V; Lithium/User Defined: 10V–15V |
| Equalize Charge Voltage | Sealed: 14.6V; Flooded: 14.8V; Lithium/User Defined: 10V–15V |
| Low Voltage Reconnection | 12.6V |
| Low Voltage Disconnect | 11.1V; Adjustable 10.5V–12.5V |
| Display | LCD Display for Battery Voltage, Solar Panel Voltage, Solar Charging Current, and Battery Status |
| Ports | PV Input, Battery Output, USB Outlet |
| Protection Features | Overload, Short Circuit, High Voltage, High Temperature, Low Voltage, Auto Correct |
| Enclosure | IP32 |
| Cooling | Heatsink |
| Humidity | 100% Non-Condensing |
| Temperature Compensation | -5mV/°C |
| Operating Temperature | -35°C to 45°C / -31°F to 113°F |
| Marine Environment Protection | Conformal Coated |
| Dimensions | 5.125" W × 3.5" L × 0.75" H |
| Weight | 0.5 lb unit weight; 1 lb boxed weight |
| Warranty | 1 Year Warranty |
