Dual AC outlets, a USB port, enclosed DC battery connections, and an optional remote switch port — UL 458 and CSA 22.2 listed for OEM, vehicle, and professional installations where certification matters.
The AIMS Power 600 Watt Pure Sine Wave Inverter (PWRI60012120S) converts 12V DC battery power into clean 120V AC at a continuous 600 watts — with 1200-watt surge capacity for startup loads. ETL Listed to conform with UL 458 and CSA 22.2 standards, it's built for applications where safety certification is required: vehicle outfitters, OEM installations, and professional mobile power systems. Dual AC receptacles plus a USB port give you flexible connection options, while enclosed DC battery terminals add a layer of protection during installation and use. This 5-amp, 12V inverter is well suited for CPAP machines, chargers, computers, small lights, fans, and similar small electronics that depend on clean, stable power.
The PWRI60012120S brings certified pure sine output, dual outlets, and practical safety features to a compact 600W package suited for both everyday and OEM/professional use.
Meets the certification standard required for OEM, commercial vehicle, and professional installations — giving installers and fleet operators the compliance documentation many applications require.
600 watts of continuous pure sine output with 1200-watt surge capacity — enough for CPAP machines, chargers, small lights, fans, and similar electronics with brief startup spikes.
Two AC receptacles let you run multiple devices at once, while a built-in USB port gives you a direct charging option for phones and small electronics without an adapter.
DC battery terminals are enclosed within the housing — reducing the risk of accidental contact or short circuits during installation and everyday handling.
A built-in remote port lets you add an optional remote on/off switch — letting you control the inverter from a separate location without reaching the unit directly.
| Continuous Output Power | 600 Watts |
|---|---|
| Surge / Peak Power | 1,200 Watts |
| Output Voltage | 120V AC |
| Output Voltage Regulation | ± 3% |
| Output Waveform | Pure Sine Wave |
| Output Frequency | 60 Hz |
| AC Output Socket Type | Dual Type 2 — 3-prong + USB Output |
| AC Amps | 5A |
| Full Load Efficiency | 85% |
| 1/3 Load Efficiency | >90% |
| DC Input Voltage Range | 10–15V DC (nominal 12V) |
|---|---|
| DC Amps | 50A |
| No-Load Power Consumption | <0.6A DC |
| Battery Low Voltage Alarm | 10.6V ± 0.5V |
| Battery Low Voltage Shutdown | 10.0V ± 0.5V |
| High Input Voltage Protection | 15V (automatic shutdown) |
| Min Operating Temp (No Load) | 32°F (0°C) |
| Max Operating Temp (Full Load) | 104°F (40°C) — auto shutdown above this |
| Internal Fuse | Internal blade fuse protection |
| Certifications | ETL Listed — Conforms to UL 458 and CSA 22.2 |
| Unit Dimensions (L × W × H) | 8.39 × 5.51 × 2.91 in (21.3 × 14.0 × 7.4 cm) |
|---|---|
| Unit Weight | 3.68 lb (1.7 kg) |
| Boxed Weight | 5.0 lb (2.3 kg) |
UL 458 is the recognized safety standard for power inverters used in vehicles, and CSA 22.2 is its Canadian counterpart. Many OEM installers, fleet operators, and professional vehicle upfitters require this certification to meet company safety policies, insurance requirements, or customer specifications. This inverter is ETL Listed and conforms to both standards, making it a compliant choice for those professional and commercial installations as well as everyday consumer use.
Most CPAP machines, including those with humidifiers, draw well under 100W during normal operation, with brief higher draws during heating cycles — comfortably within this inverter's 600W continuous and 1200W surge capacity. Pure sine wave output is generally recommended by CPAP manufacturers for compatibility with the device's internal power supply. Always check your specific CPAP model's power draw and consult the manufacturer if you have questions about battery-powered operation.
All outlets and the USB port share the inverter's total 600W continuous capacity. You can run multiple devices simultaneously as long as their combined wattage stays within 600W — for example, a CPAP machine on one AC outlet, a small fan on the other, and a phone charging via USB. Add up the running wattage of everything you plan to use at once to confirm it fits within the inverter's capacity.
This inverter has a built-in port for an optional remote on/off switch, sold separately by AIMS Power. The remote switch lets you turn the inverter on and off from a separate location — useful if the inverter is mounted somewhere hard to reach, such as under a seat, in a storage compartment, or behind equipment.
The included 28" alligator clip cables connect directly to your 12V battery's terminals — red to positive, black to negative. The DC battery connections on the inverter are enclosed within the housing for added protection against accidental contact. This inverter draws up to 50A DC at full load, so connect to a battery with sufficient capacity for your intended runtime.
This inverter is backed by a 2-year warranty on parts and labor from date of purchase, plus free 2-year technical support from AIMS Power's tech team. As an authorized AIMS Power dealer, TrueStead Supply ensures your warranty is valid from day one.
