Convert 12V DC battery power into 120V AC output for properly sized tools, pumps, motors, and general mobile power applications.
The AIMS Power PWRB1000 1000 Watt 12V Modified Sine Power Inverter is an economical DC-to-AC power solution for users who need practical 120V AC output from a 12V battery source. It delivers 1000 watts of continuous power with 2000 watts of surge capacity, helping support compatible startup loads within the inverter’s rating. The modified sine wave output is designed for many common tools, pumps, motors, and general AC devices that do not require pure sine wave power. With two AC receptacles, LED status indicators, overload protection, over-temperature protection, short-circuit protection, and cooling fan support, this inverter is built for straightforward power conversion in RV, marine, vehicle, small solar, backup, and off-grid battery setups.
Built for practical 12V power conversion, this AIMS Power inverter combines usable output, surge support, compact sizing, and essential protection features in a straightforward mobile-ready design.
Provides 1000 watts of continuous AC output and 2000 watts of surge capacity for compatible loads within the inverter’s rating.
Converts 12V DC battery power into 120V AC output for properly configured vehicle, RV, marine, backup, and small off-grid power systems.
Two AC receptacles provide convenient plug-in access for compatible 120V AC devices.
At 11" × 5.25" × 3.25" and 3.2 lbs, the inverter fits easily into mobile, RV, boat, work-truck, or compact battery power setups.
The listed greater-than-90% efficiency rating helps users compare inverter performance for battery-based applications.
Includes overload protection, over-temperature alarm and shutdown, AC output short-circuit protection, cooling fan support, and auto reset on most fault conditions.
The PWRB1000 produces modified sine wave output, making it an economical choice for many common AC loads that are compatible with this waveform. Modified sine wave inverters are often used for tools, pumps, motors, and general equipment, but not every device is suitable for modified sine wave power. Sensitive electronics, some variable-speed equipment, and devices with specific waveform requirements may need a pure sine wave inverter instead.
This 12V inverter is a practical fit for users who need battery-based AC power in vehicles, RVs, boats, work trucks, smaller solar setups, and backup power systems. Its compact footprint and 3.2 lb unit weight make it easier to place in tight spaces, while the two AC receptacles provide straightforward plug-in access. Final load planning should be based on the connected device’s running wattage, startup wattage, and waveform requirements.
A green LED confirms power status, while a red overload LED helps identify overload conditions. The inverter also includes a cooling fan and over-temperature protection with alarm and shutdown at 55°C ± 5°C. These features help support safer operation when the inverter is used within its rated limits.
| Brand | AIMS Power |
|---|---|
| Model | PWRB1000 |
| Product Type | Modified Sine Wave Power Inverter |
| Output Waveform | Modified Sine Wave |
| AC Receptacles | 2 |
| Warranty | 2 Years |
| Tech Support | Lifetime |
| Continuous Output Power | 1000 Watts |
|---|---|
| Surge Power | 2000 Watts |
| DC Input Voltage | 12V DC |
| DC Operating Voltage | 10–15V DC |
| AC Output Voltage | 120V AC |
| Output Frequency | 60 Hz |
| Efficiency | >90% |
| No-Load Current | 0.6A |
| Power Indicator | Green LED |
|---|---|
| Overload Indicator | Red overload LED |
| Over-Temperature Protection | Alarm and shutdown at 55°C ± 5°C |
| Overload Protection | Included |
| AC Output Short-Circuit Protection | Included |
| Cooling | Cooling fan |
| Fault Reset | Auto reset on most fault conditions |
| Dimensions (L × W × H) | 11" × 5.25" × 3.25" |
|---|---|
| Unit Weight | 3.2 lbs |
| Boxed Weight | 4 lbs |
Not sure which inverter is right for your 12V setup?
Contact TrueStead Supply for inverter guidance, quote support, load sizing help, or compatibility assistance before you order.
✔ Inverter guidance ✔ Quote support ✔ Mobile and off-grid power options
Contact Us for a QuoteNo. The AIMS Power PWRB1000 is a modified sine wave inverter. If your equipment requires pure sine wave output, choose a compatible pure sine wave inverter instead.
This inverter is designed for 12V DC battery systems and has a listed DC operating voltage range of 10–15V.
It provides 1000 watts of continuous output and 2000 watts of surge power for properly sized compatible loads.
Yes. It can be used with properly configured 12V RV, marine, vehicle, work-truck, and small off-grid battery systems when the connected loads stay within the inverter’s ratings.
The inverter includes overload protection, over-temperature alarm and shutdown, AC output short-circuit protection, cooling fan support, and auto reset on most fault conditions.
